Reasons Why Your Ring Camera Is Blurry (And How To Fix A Blurry Ring Camera)

Your Ring camera video used to be crystal clear until recently. Now it’s extremely blurry, perhaps to the point that is not usable at all. 

Over time, dirt, debris, and moisture can accumulate on and in the lens, compromising the camera’s performance and image quality. 

In this article, we will explore various methods for cleaning and restoring your Ring camera lens to its original, optimal performance, keeping your home secure.

Ring Doorbell Blurry Image

Causes & Solutions for Blurry or Distorted Images in Ring Cameras

A Ring camera lens might be blurry or distorted due to a variety of reasons, including:

Dirt or Debris 

Over time, dirt, dust, or other debris can accumulate on the lens of the camera, leading to a blurry or distorted image.

Solution: Use a microfiber cloth to gently clean the lens. For stubborn dirt or smudges, lightly dampen the cloth with a lens-cleaning solution.

Scratches on the Lens

Scratches or scuffs on the lens can also lead to distorted images. This can occur due to harsh cleaning methods or accidental contact with a sharp object.

Solution: If the scratches are minor, a lens polishing kit (Amazon Link) may help. However, if the scratches are severe, you might need to sand and polish the lens, or the easier solution is to replace the entire camera. 

Condensation or Moisture

If your Ring camera is exposed to varying temperatures, condensation can form on the inside or outside of the lens, causing the image to appear blurry. This is more common in areas with high humidity or during certain seasons.

Solution: If there’s condensation on the outside of the lens, you can wipe it off with a microfiber cloth. Rain-X or a similar product will help prevent this from happening.

For moisture inside the lens, you will need to disassemble the camera and dry out the interior. Before doing this, know that taking apart your Ring camera will void the warranty. If your Ring is under warranty, contact them first.

You can use a hairdryer on a cool setting or even place the lens in the oven. This will cause the water to evaporate from inside the lens. 

Be sure to seal the camera properly during reassembly to prevent future moisture ingress.

Software Issues

Sometimes, the issue could be with the software, not the hardware. 

Solution: Make sure your Ring device and the Ring app on your phone are updated to the latest version. 

If the problem persists, consider resetting the device to its factory settings and reinstalling the app.

Wi-Fi Connection

A poor Wi-Fi signal can lead to lower video quality, which may appear as a blurry or distorted image.

Solution: Ensure your Wi-Fi signal is strong at the camera’s location. If it isn’t, consider moving the router closer to the camera or using a Wi-Fi extender. 

Check the RSSI (Received Signal Strength Indicator) in the Device Health section of your Ring app to verify the signal strength.

UV Damage

Over time, exposure to the sun can cause damage to the lens, leading to a hazy or blurry image.

Solution: Sand off the UV coating that is beginning to fail. Use a fine-grit sandpaper to restore the clarity, and recoat with a UV protectant. This article has all the steps to removing the UV coating and polishing it up like new.

Physical Damage & Incorrect Focus

If the Ring camera has been dropped or hit, it may have suffered damage to the lens or internal components, affecting the image quality. 

If the lens is misaligned and is not focused correctly, the image may appear blurry. 

Solution: If you’ve tried everything else and the camera is still producing blurry or distorted images, there might be a hardware issue with the camera itself. Contact Ring customer service for support, as you might need to replace the device.

In many cases, cleaning the lens or addressing the Wi-Fi signal strength can improve the image quality. However, if the lens is scratched, damaged, or if there’s a software issue, you may need to contact Ring customer support for further assistance.

Preventive Measures to Keep Your Ring Camera Lens Clear

While fixing a blurry or distorted lens is necessary in order to keep using your Ring camera, preventing the problem in the first place can save you time and money. 

By following these preventive measures, you can prolong the clarity and overall lifespan of your Ring camera lens, ensuring clear and high-quality video feeds for your home security.

Here are some tips to maintain the clarity of your Ring camera lens:

Regular Cleaning

Cleaning the lens regularly can help prevent the accumulation of dust, grime, or other forms of debris. Using a soft microfiber cloth is recommended, and for stubborn dirt, a lens cleaning solution can come in handy.

Lens Protector

Consider using a lens protector to safeguard your Ring doorbell camera lens from potential scratches and UV damage. These protectors can be found on Amazon fairly cheap and are usually easy to apply.

I recommend using these if your Ring camera is in direct sunlight. The UV coating is known to start peeling and cracking over time, often within 1 to 2 years.

Proper Positioning

Install your Ring camera in a location where it’s less likely to be exposed to harsh weather conditions or potential physical harm. This can help prevent scratches, UV damage, and moisture-related issues.

If possible, try to place your Ring camera in an area that is covered, such as a porch or under the eaves of your house.

Regular Updates

Keep your Ring device and the Ring app updated. This helps ensure any bugs or software-related issues that could affect the image quality are fixed promptly.

Optimizing Wi-Fi Connection

If you are moving your wireless router or access point, think about the Wi-Fi signal strength at the camera’s location.

A weak signal can cause video feed issues, including blur and distortion. Consider using a Wi-Fi extender if necessary or optimizing your router’s position to ensure a strong, stable connection. If your Ring is having problems with going offline, this article can help diagnose the problem.

Regular Device Health Check

Use the Device Health feature in the Ring app to regularly check the status of your Ring camera. This includes checking for low battery warnings, poor signal strength (RSSI), or any other issues that could potentially affect the performance of your Ring device.

Summary

The clarity of your Ring doorbell camera’s image can be impacted by several factors, including physical dirt or debris on the lens, internal moisture or condensation, Wi-Fi signal strength, or physical damage to the lens itself. 

These issues can cause your video feed to become blurry, distorted, or unclear, thus hindering the effectiveness of your security camera.

Addressing these problems involves various steps ranging from a simple cleaning of the lens with a soft microfiber cloth, the use of specific products like Rain-X or even Pam cooking spray, as some users have successfully tried, or more complex solutions like disassembling the device to remove internal moisture. 

Wi-Fi signal strength can be improved by checking the Received Signal Strength Indicator (RSSI) and making necessary adjustments to your Wi-Fi settings. Physical damage may require professional repair or a replacement of the camera itself.

Prevention is part of maintaining the quality of your Ring doorbell camera’s lens. Regular cleanings, protecting the lens from harsh weather conditions, ensuring a strong Wi-Fi connection, and carefully handling the device to avoid physical damage can go a long way in maintaining a clear, high-quality video feed from your Ring doorbell camera.

Josh

Hey, I’m Josh! Welcome to Expert Home Automation. Tech is what I do for a living and as a hobby. You can learn more about me here.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts